It’s been about 20 years since the last time I did it. All hail the gods of thermal conductivity!

  • Infynis@midwest.socialEnglish
    1·
    4 hours ago

    I just did my desktop this week and it’s still running hot, so now I have to replace the cooler 😭

  • Aralakh@lemmy.ca
    2·
    13 hours ago

    I have yet to do this, what’s the best way to clean the old paste or are are you simply applying it over top?

    • davetortoise@reddthat.com
      2·
      8 hours ago

      In my experience IPA is almost always the right answer when cleaning sensitive electronic components. Haven’t used it for cleaning thermal paste specifically but it would be my go-to.

      • Aralakh@lemmy.ca
        1·
        5 hours ago

        Thank you!

        Quick edit: I don’t think I’d seen isopropyl alcohol written like that, thought you were suggesting IPA (the beer) haha.

  • adarza@lemmy.ca
    2·
    14 hours ago

    in the 1000s of laptops i’ve worked on over the last 30 years, i’ve never once tore one apart specifically to swap thermal compound, never needed to. only gets redone if the heatsink assembly needs to come out in order to get at the fan or some other part inside.

  • dropdrip@lemmy.ml
    4·
    18 hours ago

    Is there really a point to this? Similar time-frame as you. Old CPUs are pretty much trash. It works. No one would buy it though. Applying thermal-paste would do what? Make it run a bit cooler? I don’t even monitor the temperature… I’m writing from a place of ignorance. I do think things should be properly maintained; I just hadn’t thought of reapplying thermal-paste before.

    • Unpigged@lemmy.dbzer0.comOP
      2·
      14 hours ago

      Before: watching hd video in full screen VLC launched system towards 92C and fan spinning up to 7k.

      After: same load, temp around 72, cooler at 5…6k rpm. stress-ng for 5 minutes couldn’t heat it up by 90.

      I also sprayed some lube on the cooler, more as an experiment.

      I think it was worth it but also fun.

    • Bluewing@lemmy.world
      1·
      15 hours ago

      I’ve got a 10 or 12 year old laptop running as a modest home server. It’s a great use of old machines. I haven’t yet redone the thermal paste, but the temperature seldom exceeds 50C as is and at idle is only 40C.

    • Siegfried@lemmy.world
      1·
      18 hours ago

      Im still using my 2012 laptop. Third thermal paste change now. It is old, but it does the job.

      Also, fabric paste is usually shit.

  • prole@lemmy.blahaj.zone
    1·
    14 hours ago

    Does anyone else have experience with liquid metal instead of thermal paste?

    I’ve got a Framework which apparently uses a liquid metal pad instead so you don’t need to re-up the paste.

    Does anyone know of any other maintenance that might be needed instead?

    • Dimseboms@lemmy.world
      2·
      12 hours ago

      I’ve experienced that liquid metal starts seeping into the die which makes it disintegrate. I actually had a CPU that I was cooling with LM blow up after about one year with the solution on it. There was a whole piece of the die that looked like it could have been one of the cores that was just completely gone when I took off the cooler to inspect why it wasn’t booting!

      Newer framework machines have switched to something called PTM7958 which is a phase change material that has almost the same cooling performance as liquid metal but it is not conductive which makes it safer in terms of potential short circuits. It also keeps getting better with continued use as the thermal cycling between liquid and gel form (changes at around 55c if i remember correctly) makes it fill microscopic imperfections with use. From what I’ve read this material will last somewhere between 5-10 years before it starts to deteriorate.

      It can be worth looking into.

      • xspurnx@leminal.space
        2·
        9 hours ago

        Another option would be Thermal Grizzly’s Kryosheet. It is a thin graphene pad (conductive!) and supposedly lasts even longer and performs only slightly less good.

        I recently installed one on my PS4 Pro and it’s working very well (the fan stays so quiet that I’m now noticing a frequency shifting coil whine which is driving me nuts - pretty sure it’s coming from the VRAM too so simply switching out the PSU won’t help… but whatever).